JOURNAL ARTICLES

 

1.     H. Rajabi, K. Stamm, E. Appel, S. N. Gorb, “Micro-morphological adaptations of the wing nodus to flight behaviour in four dragonfly species from the family Libellulidae (Odonata: Anisoptera)”, Arthropod Structure & Development (Special Issue in Insect Flight), In press.

doi: https://doi.org/10.1016/j.asd.2018.01.003

 

2.     M. Schmitt, T. H. Büscher, S. N. Gorb, H. Rajabi “How does a slender tibia resist buckling? Effect of material, structural and geometric characteristics on bucklingbehaviour of the hindleg tibia in stick insect postembryonic development”, Journal of Experimental Biology, 2018, 221, jeb173047.

 

 

doi: https://doi.org/10.1242/jeb.173047

 

3.     H. Rajabi, V. Schroeter, Sh. Eshghi, S. N. Gorb, “The probability of wing damage in the dragonfly Sympetrum vulgatum (Anisoptera: Libellulidae): a field study”, Biology Open, 2017, 6, 1290-1293.

doi: https://doi.org/10.1242/bio.027078

 

4.     H. Rajabi, N. Ghoroubi, K. Stamm, E. Appel, S. N. Gorb, “Dragonfly wing nodus: A one-way hinge contributing to the asymmetric wing deformation”, Acta Biomaterialia, 2017, 60, 330-338.

doi: https://doi.org/10.1016/j.actbio.2017.07.034

 

5.     H. Rajabi, M. Jafarpour, ADarvizeh, J.-H. DirksS. N. Gorb, “Stiffness distribution in insect cuticle: a continuous or a discontinuous profile?”, Journal of The Royal Society Interface, 2017, 14, 1-10.

 

doi: https://doi.org/10.1098/rsif.2017.0310

 

6.     H. Rajabi, P. Bazargan, APourbabaei, Sh. Eshghi, A. Darvizeh, S. N. Gorb, D. Taylor, J.-H. Dirks, “Wing cross veins: an efficient biomechanical strategy to mitigate fatigue failure of insect cuticle”, Biomechanics and Modeling in Mechanobiology, 2017, 16, 1-9.

doi:http://dx.doi.org/10.1007/s10237-017-0930-6

 

7.     H. Rajabi, A. Shafiei, A. Darvizeh, S. N. Gorb, “Resilin microjoints: a smart design strategy to avoid failure in dragonfly wings”, Scientific Reports, 6, 39039.

doi: http://dx.doi.org/10.1038/srep39039

 

8.     H. Rajabi, N. Ghoroubi, M. Malaki, A. Darvizeh, S. N. Gorb, “Basal Complex and Basal Venation of Odonata Wings: Structural Diversity and Potential Role in the Wing Deformation”,PLoS ONE, 2016, 11(8), e0160610.

doi: http://dx.doi.org/10.1371/journal.pone.0160610

 

9.     H. Rajabi, N. Ghoroubi, A. Darvizeh, E. Appel, S. N. Gorb, “Effects of multiple vein microjoints on the mechanical behaviour of dragonfly wings: numerical modelling”, Royal Society Open Science, 2016, 3, 150610.

doi: http://dx.doi.org/10.1098/rsos.150610

 

10.  H. Rajabi, A. Shafiei, A. Darvizeh, J-H. Dirks, E. Appel, S. N. Gorb, “Effect of microstructure on the mechanical and damping behaviour of dragonfly wing veins”, Royal Society Open Science, 2016, 3, 160006.

doi: http://dx.doi.org/10.1098/rsos.160006

 

11.  H. Rajabi, M. Rezasefat, A. Darvizeh, J-H. Dirks, Sh. Eshghi, A. Shafiei, T. Mirzababaie Mostofi, S. N. Gorb, “A comparative study of the effects of constructional elements on the mechanical behaviour of dragonfly wings”, Applied Physics A, 2016, 122(1), 1-13.

 

doi: http://dx.doi.org/10.1007/s00339-015-9557-6

 

12.  Sh. Eshghi, H. Rajabi, A. Darvizeh, V. Nooraeefar, M. Alitavoli, H. Babaei, “Simple finite element modeling of planar composite structures using digital image processing technique in Matlab”, Journal of Science and Technology of Composites, 2016, 3(2), 195-202. (Persian)

13.  H. Rajabi, N. Ghoroubi, A. Darvizeh, J-H. Dirks, E. Appel, S. N. Gorb, “A comparative study of the effects of vein-joints on the mechanical behaviour of insect wings: I. Single joints”,Bioinspiration & Biomimetics, 2015, 10(5), 056003.

 

doi: http://dx.doi.org/10.1088/1748-3190/10/5/056003

 

14.  Sh. Eshghi, H. Rajabi, A. Darvizeh, V. Nooraeefar, A. Shafiei, T. Mirzababaie Mostofi, M. Monsef.  A Simple method for geometric modelling of biological structures using image processing technique, Scientia Iranica, 2016, 23(5), 2194-2202.

15.  H. Rajabi, A. Shafiei, A. Darvizeh, H. Babaei, “Experimental and numerical investigations of crack propagation in dragonfly wing veins”, AmirKabir Journal of Science & Research (Mechanical Engineering), 2016, 48(2), 61-64.

 

 

doi: http://dx.doi.org/10.22060/mej.2016.598

 

16.  H. Rajabi, A. Darvizeh, A. Shafiei, J-H. Dirks, D. Taylor, “Numerical investigation of insect wing fracture behaviour”, Journal of Biomechanics, 2015, 48(1), 89-94.

 

doi: http://dx.doi.org/10.1016/j.jbiomech.2014.10.037

 

17.  H. Rajabi, H. Monsef, M. Zare, A. Armandei, M. Moghadami, “Design, development and demonstration of an improved bird washing machine”, Ecotoxicology, 2014, 23(5), 960-965.(Distinguished by European Commission)

 

doi: http://dx.doi.org/10.1007/s10646-014-1238-2

 

18.  H. Rajabi, A. Darvizeh, A. Shafiei, Sh. Eshghi, A. Khaheshi, “Experimental and numerical investigations of Otala lactea’s shell I. Quasi-static analysis”, Journal of the Mechanical Behavior of Biomedical Materials, 2014, 32, 8-16.

 

doi: http://dx.doi.org/10.1016/j.jmbbm.2013.12.008

 

19.  H. Rajabi, A. Darvizeh, “Investigation of the dynamic behavior of thick piezoelectric cylinders”, Scientia Iranica, 2014, 21(3), 587-599.

 

 

 

 

20.  A. Darvizeh, S. Anami Rad, M. Darvizeh, R. Ansari and H. Rajabi, “Investigation of microstructure and mechanical behavior of Woodlouse shells using experimental methods and numerical modeling”. Modares Journal of Mechanical Engineering, 2014, 14(7), 183-190. (Persian)

 

 

 

21.  A. Darvizeh, N. Shafiee, M. darvizeh, H. Habibollahi and H. Rajabi, “Investigation of the effects of constructional elements on the biomechanical behavior of desert locust hind wing”.Modares Journal of Mechanical Engineering, 2014, 14(14), 235-244. (Persian)

 

 

 

22.  H. Rajabi, A. Darvizeh, “Experimental investigations of the functional morphology of dragonfly wings”, Chinese Physics B, 2013, 22(8), 088702.

 

 

doi: http://dx.doi.org/10.1088/1674-1056/22/8/088702

 

23.  M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh, “Experimental analysis and numerical modeling of mollusk shells as a three dimensional integrated volume”, Journal of the Mechanical Behavior of Biomedical Materials, 2012, 16, 38-54.

 

 

doi: http://dx.doi.org/10.1016/j.jmbbm.2012.08.006

 

24.  H. Rajabi, A. Darvizeh, “Elasto-Plastic Analysis of Thick Cylinders Subjected to Internal Electro-magnetic Loading”, Journal of Mechanics, 2012, 28(3), 423-430.

 

 

doi: http://dx.doi.org/10.1017/jmech.2012.51

 

25.  A. Rezaei, A. Darvizeh, A. Basti, H. Rajabi, “Three Dimensional Static and Dynamic Analysis of thick Functionally Graded Plates by the Meshless Local Petrov-Galerkin (MLPG) Method”,Engineering Analysis with Boundary Elements, 2011, 35, 1168-1180. (Top Paper)

 

doi: http://dx.doi.org/10.1016/j.enganabound.2011.05.011

 

 

26.  A. Rezaei, M. Alitavoli, A. Darvizeh, H. Rajabi, “Modeling and Simulation  of Spider's  Walking”, International Journal of Nature & Design & Ecodynamics, 2011, 6(2), 83-96.

doi: http://dx.doi.org/10.2495/DNE-V6-N2-83-96

 

 

27.  H. Rajabi, M. Moghadami, A. Darvizeh, “Investigation of Microstructure, Natural Frequencies and Vibration Modes of Dragonfly Wing”, Journal of Bionic Engineering, 2011, 8(2), 165-173. (Top Paper)

 

doi: http://dx.doi.org/10.1016/S1672-6529(11)60014-0

 

28.  M. Darvizeh, A. Darvizeh, V. Arab Zadeh, H. Rajabi, “Nonlinear analysis of multi-layered beams with piezoelectric layers considering large deformations”, Modares Journal of Mechanical Engineering, 2010, 10(2), 57-67. (Persian)

 

 

29.  M. Darvizeh, A. Darvizeh, H. Rajabi, A. Rezaei, “Free Vibration Analysis of Dragonfly Wings using Finite Element Method”, International Journal of Multiphysics, 2009, 3(1), 101-110.

 

doi: http://dx.doi.org/10.1260/175095409787924454 

 

Read more...

Journal

Image result for publication icon

H. Rajabi, N. Ghoroubi, M. Malaki, A. Darvizeh, S. N. Gorb,

“Basal Complex and Basal Venation of Odonata Wings: Structural Diversity and Potential Role in the Wing Deformation”,

PLoS ONE, 2016, 11(8), e0160610.

 Publisher's website

 

Image result for publication icon

H. Rajabi, N. Ghoroubi, A. Darvizeh, E. Appel, S. N. Gorb,

“Effects of multiple vein microjoints on the mechanical behaviour of dragonfly wings: numerical modelling”,

Royal Society Open Science, 2016, 3, 150610.

 Publisher's website

 

Image result for publication icon

H. Rajabi, A. Shafiei, A. Darvizeh, J-H. Dirks, E. Appel, S. N. Gorb,

“Effect of microstructure on the mechanical and damping behaviour of dragonfly wing veins”,

Royal Society Open Science, 2016, 3, 160006.

 Publisher's website

 

Image result for publication icon

H. Rajabi, M. Rezasefat, A. Darvizeh, J-H. Dirks, Sh. Eshghi, A. Shafiei, T. Mirzababaie Mostofi, S. N. Gorb,

“A comparative study of the effects of constructional elements on the mechanical behaviour of dragonfly wings”,

Applied Physics A, 2016, 122(1), 1-13.

 Publisher's website

 

Image result for publication icon

Sh. Eshghi, H. Rajabi, A. Darvizeh, V. Nooraeefar, M. Alitavoli, H. Babaei,

“Simple finite element modeling of planar composite structures using digital image processing technique in Matlab”,

Journal of Science and Technology of Composites, 2016, 3(2), 195-202. (Persian)

 

 

Image result for publication icon

H. Rajabi, N. Ghoroubi, A. Darvizeh, J-H. Dirks, E. Appel, S. N. Gorb,

“A comparative study of the effects of vein-joints on the mechanical behaviour of insect wings: I. Single joints”,

Bioinspiration & Biomimetics, 2015, 10(5), 056003.

 Publisher's website

 

Image result for publication icon

Sh. Eshghi, H. Rajabi, A. Darvizeh, V. Nooraeefar, A. Shafiei, T. Mirzababaie Mostofi, M. Monsef.

A Simple method for geometric modelling of biological structures using image processing technique,

Scientia Iranica, 2016, 23(5), 2194-2202.

 

 

Image result for publication icon

H. Rajabi, A. Shafiei, A. Darvizeh, H. Babaei,

“Experimental and numerical investigations of crack propagation in dragonfly wing veins”,

AmirKabir Journal of Science & Research (Mechanical Engineering), 2016, 48(2), 61-64.

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh, A. Shafiei, J-H. Dirks, D. Taylor,

“Numerical investigation of insect wing fracture behaviour”,

Journal of Biomechanics, 2015, 48(1), 89-94.

 Publisher's website

 

Image result for publication icon

H. Rajabi, H. Monsef, M. Zare, A. Armandei, M. Moghadami,

“Design, development and demonstration of an improved bird washing machine”,

Ecotoxicology, 2014, 23(5), 960-965. (Distinguished by European Commission)

 Publisher's website

 

Image result for publication icon

H. Rajabi, A. Darvizeh, A. Shafiei, Sh. Eshghi, A. Khaheshi,

“Experimental and numerical investigations of Otala lactea’s shell I. Quasi-static analysis”,

Journal of the Mechanical Behavior of Biomedical Materials, 2014, 32, 8-16.

 Publisher's website

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Investigation of the dynamic behavior of thick piezoelectric cylinders”

, Scientia Iranica, 2014, 21(3), 587-599.

 

 

Image result for publication icon

A. Darvizeh, S. Anami Rad, M. Darvizeh, R. Ansari and H. Rajabi,

“Investigation of microstructure and mechanical behavior of Woodlouse shells using experimental methods and numerical modeling”.

The Modares Journal of Mechanical Engineering, 2014, 14(7), 183-190. (Persian)

 

 

Image result for publication icon

A. Darvizeh, N. Shafiee, M. darvizeh, H. Habibollahi and H. Rajabi,

“Investigation of the effects of constructional elements on the biomechanical behavior of desert locust hind wing”.

The Modares Journal of Mechanical Engineering, 2014, 14(14), 235-244. (Persian)

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Experimental investigations of the functional morphology of dragonfly wings”,

Chinese Physics B, 2013, 22(8), 088702.

 Publisher's website 

 

Image result for publication icon

M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh,

“Experimental analysis and numerical modeling of mollusk shells as a three dimensional integrated volume”,

Journal of the Mechanical Behavior of Biomedical Materials, 2012, 16, 38-54.

 Publisher's website

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Elasto-Plastic Analysis of Thick Cylinders Subjected to Internal Electro-magnetic Loading”,

Journal of Mechanics, 2012, 28(3), 423-430.

 Publisher's website

 

Image result for publication icon

A. Rezaei, A. Darvizeh, A. Basti, H. Rajabi,

“Three Dimensional Static and Dynamic Analysis of thick Functionally Graded Plates by the Meshless Local Petrov-Galerkin (MLPG) Method”

, Engineering Analysis with Boundary Elements, 2011, 35, 1168-1180. (Top Paper)

 Publisher's website

 

Image result for publication icon

A. Rezaei, M. Alitavoli, A. Darvizeh, H. Rajabi,

“Modeling and Simulation of Spider’s Walking”,

International Journal of Nature & Design & Ecodynamics, 2011, 6(2), 83-96.

 Publisher's website

 

Image result for publication icon

H. Rajabi, M. Moghadami, A. Darvizeh,

“Investigation of Microstructure, Natural Frequencies and Vibration Modes of Dragonfly Wing”,

Journal of Bionic Engineering, 2011, 8(2), 165-173. (Top Paper)

 Publisher's website

 

Image result for publication icon

M. Darvizeh, A. Darvizeh, V. Arab Zadeh, H. Rajabi,

“Nonlinear analysis of multi-layered beams with piezoelectric layers considering large deformations”,

The Modares Journal of Mechanical Engineering, 2010, 10(2), 57-67. (Persian)

 

 

Image result for publication icon

M. Darvizeh, A. Darvizeh, H. Rajabi, A. Rezaei,

“Free Vibration Analysis of Dragonfly Wings using Finite Element Method”

, International Journal of Multiphysics, 2009, 3(1), 101-110.

 Publisher's website

 

Read more...

Conference Papers

Image result for conference paper icon

H. Rajabi, P. Bazargan, A. Pourbabaei, A. Darvizeh, A. Shafiei, Sh. Eshghi,

“Simulation of fatigue crack propagation in insect cuticle”,

The 4rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran-Iran, 16-17 December 2014.

 

Image result for conference paper icon

H. Rajabi, M. Monsef, A. Darvizeh, A. Shafiei,

“Numerical investigation of fracture behavior of beetle elytra”,

The 4rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran-Iran, 16-17 December 2014.

 

Image result for conference paper icon

A. Darvizeh, R. Ansari, A. Momen, H. Rajabi,

“Experimental and numerical studies of the mechanical behavior of mollusk shells”,

The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech-2014), Tehran-Iran, 18-19 February 2014.

 

Image result for conference paper icon

Sh. Eshghi, H. Rajabi, V. Nooraeifar, K. Rashvand, A. Darvizeh,

“Two and three dimensional FE modeling of dragonfly wings using image processing technique”,

8th Students Conference on Mechanical Engineering, Rasht-Iran, 8-10 October 2014. (Persian)

 

Image result for conference paper icon

M. Jafarpoor, A. Asgharnia, Sh. Eshghi, H. Rajabi, V. Nooraeifar, A. Darvizeh,

“Mathematical modeling of claw-shaped structures using image processing technique”,

8th Students Conference on Mechanical Engineering, Rasht-Iran, 8-10 October 2014. (Persian)

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, S. Fatahtooei Nejad, A. Khaheshi, P. Haghdoust,

“Biomechanical Properties of Hen’s Eggshell: Experimental Study and Numerical Modeling”,

International Conference on Mechanical, Industrial, and Manufacturing Engineering (ICMIME 2013), Copenhagen-Denmark, 13-14 June 2013.

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh, N. Rezaei, F. Sharifi, A. Shahnazari,

“Experimental and numerical studies on composite microstructure of Otala lactea’s shell”,

The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran-Iran, 18-19 December 2012.

 

Image result for conference paper icon

S. Daryadel, H. Rajabi, A. Darvizeh,

“Experimental and numerical investigations on quail eggshells composite structure”,

The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran-Iran, 18-19 December 2012

.

Image result for conference paper icon

M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh,

“Microstructural investigation and three dimensional modeling Of snail shells”,

The 20th. Annual (International) Conference on Mechanical Engineering-ISME, Shiraz-Iran, 15-17 May 2012. (Persian)

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi,

“Numerical analysis of thick circular cylinders subjected to explosive loading”,

Engineering Mechanics Institute Conference 2011, Boston, MA USA, 2-4 June 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Rezaei, A. Tajallipour,

“Mathematical prediction of dynamic behavior of double shell systems”,

The 16th Asian Technology Conference in Mathematics, Bolu-Turkey, 19-23 September 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Khaheshi,

“Biomechanical aspects of dragonfly wing composite structure”,

Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Khaheshi, J. Etedadi, M. K. Sobhani,

“Morphological and numerical investigations of butterfly wing composite structure”,

Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Khaheshi, M. K. Sobhani, J. Etedadi,

“Investigation of bee wing composite structure: A scanning electron microscopy study and numerical analysis”,

Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

 

Image result for conference paper icon

A. Darvizeh, M. Faghih-Shojaei, V. Mohammadi, H. Rajabi,

“3D finite element simulation of seashells”,

Internal Congress of The University of Guilan, Rasht-Iran, 9-11 May 2011. (Persian)

 

Image result for conference paper icon

M. Tofighi, S. Chehresa, H. Rajabi, A. Darvizeh,

“Investigation of Biomechanical aspects of Butterfly Wing microstructure”,

The first Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh, A. Khaheshi, A. Naser-Eslami, S. Ghadimi,

“Numerical Investigation of Aerodynamic Characteristics of Dragonfly Wing”,

The first Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

 

Image result for conference paper icon

M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh,

“Numerical Simulation of Conch Shells as a Three Dimensional Integrated Valume”,

The first Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh,

“Free vibration analysis of non-circular cylindrical shells coated with piezoelectric layers”,

The 15th Asian Technology Conference in Mathematics, Kuala Lumpur-Malaysia, 17-21 December 2010.

 

Image result for conference paper icon

A. Rezaei , A. Basti, H. Rajabi,

“Three Dimensional Elasto-Dynamic Analysis Of Thick Plates By The Meshless Local Petrov-galerkin Method”

 The 18th. Annual (International) Conference on Mechanical Engineering-ISME, Tehran-Iran, 11-13 May 2010.

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh,

“Theoretical investigation of the plastic deformation of circular cylindrical shells”,

International Conference on Applied Mechanics, Materials and Manufacturing, Muscat-Oman,13-15 December 2010.

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh, Kh. Fallah Nejad, A. Khaheshi,

“Dynamic response of piezoelectric circular cylinders to internal dynamic loading”,

International Conference on Applied Mechanics, Materials and Manufacturing, Muscat-Oman,13-15 December 2010.

 

Image result for conference paper icon

H. Rajabi, A. Rezaei, A. Darvizeh, M. Darvizeh, “Analytical Analysis of Thick-Walled Tubes Coated with Piezoelectric Layers under Dynamic Loading”, Asian Pacific Conference for Materials and Mechanics, Yokohama-Japan, 13-16 November 2009.

 

Image result for conference paper icon

R. Ansari, A. Rezaei, H. Rajabi, F. Sarreshtehdari,

“Two-Dimensional Deformation and Stress Analysis of Elastic Cantilever Beam Using MLPG Method”,

The 1th. National Conference of Mathematics and its Applications, Lahijan-Iran, 5 March 2008.

 

Image result for conference paper icon

A. Bagheri, S. Gh. Beygi, H. Rajabi, A. Rezaei, S. Basiri,

“Design of Robust Controller with H∞ Method for Two Legs Robot Walking on Slope Surface”,

The 16th. Annual (International) Conference on Mechanical Engineering-ISME, Kerman-Iran, 13-15 May 2007. (Persian)

 

Image result for conference paper icon

H. Torabian, H. Rajabi,

“Optimized Design of Composite Springs Using Genetic Algorithms”,

2nd Iranian Congress of Mechanical Engineering, Shahr-e-Rey-Iran, November 2007. (Persian)

 

Image result for conference paper icon

K. Deng, A. Kovalev, H. Rajabi, C. F. Schaber, Z. D. Dai and S. N. Gorb,

“Damping behaviour of primary flight feathers of wood pigeon Columba palumbus”,

109th Annual Meeting of the German Zoological Society (DZG), 14 – 17 September 2016.

 

Read more...

Journal Article

Image result for publication icon

H. Rajabi, N. Ghoroubi, M. Malaki, A. Darvizeh, S. N. Gorb,

“Basal Complex and Basal Venation of Odonata Wings: Structural Diversity and Potential Role in the Wing Deformation”,

PLoS ONE, 2016, 11(8), e0160610.

 Publisher's website

 

Image result for publication icon

H. Rajabi, N. Ghoroubi, A. Darvizeh, E. Appel, S. N. Gorb,

“Effects of multiple vein microjoints on the mechanical behaviour of dragonfly wings: numerical modelling”,

Royal Society Open Science, 2016, 3, 150610.

 Publisher's website

 

Image result for publication icon

H. Rajabi, A. Shafiei, A. Darvizeh, J-H. Dirks, E. Appel, S. N. Gorb,

“Effect of microstructure on the mechanical and damping behaviour of dragonfly wing veins”,

Royal Society Open Science, 2016, 3, 160006.

 Publisher's website

 

Image result for publication icon

H. Rajabi, M. Rezasefat, A. Darvizeh, J-H. Dirks, Sh. Eshghi, A. Shafiei, T. Mirzababaie Mostofi, S. N. Gorb,

“A comparative study of the effects of constructional elements on the mechanical behaviour of dragonfly wings”,

Applied Physics A, 2016, 122(1), 1-13.

 Publisher's website

 

Image result for publication icon

Sh. Eshghi, H. Rajabi, A. Darvizeh, V. Nooraeefar, M. Alitavoli, H. Babaei,

“Simple finite element modeling of planar composite structures using digital image processing technique in Matlab”,

Journal of Science and Technology of Composites, 2016, 3(2), 195-202. (Persian)

 

 

Image result for publication icon

H. Rajabi, N. Ghoroubi, A. Darvizeh, J-H. Dirks, E. Appel, S. N. Gorb,

“A comparative study of the effects of vein-joints on the mechanical behaviour of insect wings: I. Single joints”,

Bioinspiration & Biomimetics, 2015, 10(5), 056003.

 Publisher's website

 

Image result for publication icon

Sh. Eshghi, H. Rajabi, A. Darvizeh, V. Nooraeefar, A. Shafiei, T. Mirzababaie Mostofi, M. Monsef.

A Simple method for geometric modelling of biological structures using image processing technique,

Scientia Iranica, 2016, 23(5), 2194-2202.

 

 

Image result for publication icon

H. Rajabi, A. Shafiei, A. Darvizeh, H. Babaei,

“Experimental and numerical investigations of crack propagation in dragonfly wing veins”,

AmirKabir Journal of Science & Research (Mechanical Engineering), 2016, 48(2), 61-64.

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh, A. Shafiei, J-H. Dirks, D. Taylor,

“Numerical investigation of insect wing fracture behaviour”,

Journal of Biomechanics, 2015, 48(1), 89-94.

 Publisher's website

 

Image result for publication icon

H. Rajabi, H. Monsef, M. Zare, A. Armandei, M. Moghadami,

“Design, development and demonstration of an improved bird washing machine”,

Ecotoxicology, 2014, 23(5), 960-965. (Distinguished by European Commission)

 Publisher's website

 

Image result for publication icon

H. Rajabi, A. Darvizeh, A. Shafiei, Sh. Eshghi, A. Khaheshi,

“Experimental and numerical investigations of Otala lactea’s shell I. Quasi-static analysis”,

Journal of the Mechanical Behavior of Biomedical Materials, 2014, 32, 8-16.

 Publisher's website

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Investigation of the dynamic behavior of thick piezoelectric cylinders”

, Scientia Iranica, 2014, 21(3), 587-599.

 

 

Image result for publication icon

A. Darvizeh, S. Anami Rad, M. Darvizeh, R. Ansari and H. Rajabi,

“Investigation of microstructure and mechanical behavior of Woodlouse shells using experimental methods and numerical modeling”.

The Modares Journal of Mechanical Engineering, 2014, 14(7), 183-190. (Persian)

 

 

Image result for publication icon

A. Darvizeh, N. Shafiee, M. darvizeh, H. Habibollahi and H. Rajabi,

“Investigation of the effects of constructional elements on the biomechanical behavior of desert locust hind wing”.

The Modares Journal of Mechanical Engineering, 2014, 14(14), 235-244. (Persian)

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Experimental investigations of the functional morphology of dragonfly wings”,

Chinese Physics B, 2013, 22(8), 088702.

 Publisher's website 

 

Image result for publication icon

M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh,

“Experimental analysis and numerical modeling of mollusk shells as a three dimensional integrated volume”,

Journal of the Mechanical Behavior of Biomedical Materials, 2012, 16, 38-54.

 Publisher's website

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Elasto-Plastic Analysis of Thick Cylinders Subjected to Internal Electro-magnetic Loading”,

Journal of Mechanics, 2012, 28(3), 423-430.

 Publisher's website

 

Image result for publication icon

A. Rezaei, A. Darvizeh, A. Basti, H. Rajabi,

“Three Dimensional Static and Dynamic Analysis of thick Functionally Graded Plates by the Meshless Local Petrov-Galerkin (MLPG) Method”

, Engineering Analysis with Boundary Elements, 2011, 35, 1168-1180. (Top Paper)

 Publisher's website

 

Image result for publication icon

A. Rezaei, M. Alitavoli, A. Darvizeh, H. Rajabi,

“Modeling and Simulation of Spider’s Walking”,

International Journal of Nature & Design & Ecodynamics, 2011, 6(2), 83-96.

 Publisher's website

 

Image result for publication icon

H. Rajabi, M. Moghadami, A. Darvizeh,

“Investigation of Microstructure, Natural Frequencies and Vibration Modes of Dragonfly Wing”,

Journal of Bionic Engineering, 2011, 8(2), 165-173. (Top Paper)

 Publisher's website

 

Image result for publication icon

M. Darvizeh, A. Darvizeh, V. Arab Zadeh, H. Rajabi,

“Nonlinear analysis of multi-layered beams with piezoelectric layers considering large deformations”,

The Modares Journal of Mechanical Engineering, 2010, 10(2), 57-67. (Persian)

 

 

Image result for publication icon

M. Darvizeh, A. Darvizeh, H. Rajabi, A. Rezaei,

“Free Vibration Analysis of Dragonfly Wings using Finite Element Method”

, International Journal of Multiphysics, 2009, 3(1), 101-110.

 Publisher's website

 

Read more...

Conference Papers

Image result for conference paper icon

H. Rajabi, P. Bazargan, A. Pourbabaei, A. Darvizeh, A. Shafiei, Sh. Eshghi,

“Simulation of fatigue crack propagation in insect cuticle”,

The 4rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran-Iran, 16-17 December 2014.

 

Image result for conference paper icon

H. Rajabi, M. Monsef, A. Darvizeh, A. Shafiei,

“Numerical investigation of fracture behavior of beetle elytra”,

The 4rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran-Iran, 16-17 December 2014.

 

Image result for conference paper icon

A. Darvizeh, R. Ansari, A. Momen, H. Rajabi,

“Experimental and numerical studies of the mechanical behavior of mollusk shells”,

The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech-2014), Tehran-Iran, 18-19 February 2014.

 

Image result for conference paper icon

Sh. Eshghi, H. Rajabi, V. Nooraeifar, K. Rashvand, A. Darvizeh,

“Two and three dimensional FE modeling of dragonfly wings using image processing technique”,

8th Students Conference on Mechanical Engineering, Rasht-Iran, 8-10 October 2014. (Persian)

 

Image result for conference paper icon

M. Jafarpoor, A. Asgharnia, Sh. Eshghi, H. Rajabi, V. Nooraeifar, A. Darvizeh,

“Mathematical modeling of claw-shaped structures using image processing technique”,

8th Students Conference on Mechanical Engineering, Rasht-Iran, 8-10 October 2014. (Persian)

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, S. Fatahtooei Nejad, A. Khaheshi, P. Haghdoust,

“Biomechanical Properties of Hen’s Eggshell: Experimental Study and Numerical Modeling”,

International Conference on Mechanical, Industrial, and Manufacturing Engineering (ICMIME 2013), Copenhagen-Denmark, 13-14 June 2013.

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh, N. Rezaei, F. Sharifi, A. Shahnazari,

“Experimental and numerical studies on composite microstructure of Otala lactea’s shell”,

The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran-Iran, 18-19 December 2012.

 

Image result for conference paper icon

S. Daryadel, H. Rajabi, A. Darvizeh,

“Experimental and numerical investigations on quail eggshells composite structure”,

The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran-Iran, 18-19 December 2012

.

Image result for conference paper icon

M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh,

“Microstructural investigation and three dimensional modeling Of snail shells”,

The 20th. Annual (International) Conference on Mechanical Engineering-ISME, Shiraz-Iran, 15-17 May 2012. (Persian)

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi,

“Numerical analysis of thick circular cylinders subjected to explosive loading”,

Engineering Mechanics Institute Conference 2011, Boston, MA USA, 2-4 June 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Rezaei, A. Tajallipour,

“Mathematical prediction of dynamic behavior of double shell systems”,

The 16th Asian Technology Conference in Mathematics, Bolu-Turkey, 19-23 September 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Khaheshi,

“Biomechanical aspects of dragonfly wing composite structure”,

Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Khaheshi, J. Etedadi, M. K. Sobhani,

“Morphological and numerical investigations of butterfly wing composite structure”,

Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Khaheshi, M. K. Sobhani, J. Etedadi,

“Investigation of bee wing composite structure: A scanning electron microscopy study and numerical analysis”,

Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

 

Image result for conference paper icon

A. Darvizeh, M. Faghih-Shojaei, V. Mohammadi, H. Rajabi,

“3D finite element simulation of seashells”,

Internal Congress of The University of Guilan, Rasht-Iran, 9-11 May 2011. (Persian)

 

Image result for conference paper icon

M. Tofighi, S. Chehresa, H. Rajabi, A. Darvizeh,

“Investigation of Biomechanical aspects of Butterfly Wing microstructure”,

The first Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh, A. Khaheshi, A. Naser-Eslami, S. Ghadimi,

“Numerical Investigation of Aerodynamic Characteristics of Dragonfly Wing”,

The first Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

 

Image result for conference paper icon

M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh,

“Numerical Simulation of Conch Shells as a Three Dimensional Integrated Valume”,

The first Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh,

“Free vibration analysis of non-circular cylindrical shells coated with piezoelectric layers”,

The 15th Asian Technology Conference in Mathematics, Kuala Lumpur-Malaysia, 17-21 December 2010.

 

Image result for conference paper icon

A. Rezaei , A. Basti, H. Rajabi,

“Three Dimensional Elasto-Dynamic Analysis Of Thick Plates By The Meshless Local Petrov-galerkin Method”

 The 18th. Annual (International) Conference on Mechanical Engineering-ISME, Tehran-Iran, 11-13 May 2010.

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh,

“Theoretical investigation of the plastic deformation of circular cylindrical shells”,

International Conference on Applied Mechanics, Materials and Manufacturing, Muscat-Oman,13-15 December 2010.

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh, Kh. Fallah Nejad, A. Khaheshi,

“Dynamic response of piezoelectric circular cylinders to internal dynamic loading”,

International Conference on Applied Mechanics, Materials and Manufacturing, Muscat-Oman,13-15 December 2010.

 

Image result for conference paper icon

H. Rajabi, A. Rezaei, A. Darvizeh, M. Darvizeh, “Analytical Analysis of Thick-Walled Tubes Coated with Piezoelectric Layers under Dynamic Loading”, Asian Pacific Conference for Materials and Mechanics, Yokohama-Japan, 13-16 November 2009.

 

Image result for conference paper icon

R. Ansari, A. Rezaei, H. Rajabi, F. Sarreshtehdari,

“Two-Dimensional Deformation and Stress Analysis of Elastic Cantilever Beam Using MLPG Method”,

The 1th. National Conference of Mathematics and its Applications, Lahijan-Iran, 5 March 2008.

 

Image result for conference paper icon

A. Bagheri, S. Gh. Beygi, H. Rajabi, A. Rezaei, S. Basiri,

“Design of Robust Controller with H∞ Method for Two Legs Robot Walking on Slope Surface”,

The 16th. Annual (International) Conference on Mechanical Engineering-ISME, Kerman-Iran, 13-15 May 2007. (Persian)

 

Image result for conference paper icon

H. Torabian, H. Rajabi,

“Optimized Design of Composite Springs Using Genetic Algorithms”,

2nd Iranian Congress of Mechanical Engineering, Shahr-e-Rey-Iran, November 2007. (Persian)

 

Image result for conference paper icon

K. Deng, A. Kovalev, H. Rajabi, C. F. Schaber, Z. D. Dai and S. N. Gorb,

“Damping behaviour of primary flight feathers of wood pigeon Columba palumbus”,

109th Annual Meeting of the German Zoological Society (DZG), 14 – 17 September 2016.

 

Read more...

Journal Articles

Image result for publication icon

H. Rajabi, N. Ghoroubi, M. Malaki, A. Darvizeh, S. N. Gorb,

“Basal Complex and Basal Venation of Odonata Wings: Structural Diversity and Potential Role in the Wing Deformation”,

PLoS ONE, 2016, 11(8), e0160610.

 Publisher's website

Image result for publication icon

H. Rajabi, N. Ghoroubi, A. Darvizeh, E. Appel, S. N. Gorb,

“Effects of multiple vein microjoints on the mechanical behaviour of dragonfly wings: numerical modelling”,

Royal Society Open Science, 2016, 3, 150610.

 Publisher's website

 

Image result for publication icon

H. Rajabi, A. Shafiei, A. Darvizeh, J-H. Dirks, E. Appel, S. N. Gorb,

“Effect of microstructure on the mechanical and damping behaviour of dragonfly wing veins”,

Royal Society Open Science, 2016, 3, 160006.

 Publisher's website

 

Image result for publication icon

H. Rajabi, M. Rezasefat, A. Darvizeh, J-H. Dirks, Sh. Eshghi, A. Shafiei, T. Mirzababaie Mostofi, S. N. Gorb,

“A comparative study of the effects of constructional elements on the mechanical behaviour of dragonfly wings”,

Applied Physics A, 2016, 122(1), 1-13.

 Publisher's website

 

Image result for publication icon

Sh. Eshghi, H. Rajabi, A. Darvizeh, V. Nooraeefar, M. Alitavoli, H. Babaei,

“Simple finite element modeling of planar composite structures using digital image processing technique in Matlab”,

Journal of Science and Technology of Composites, 2016, 3(2), 195-202. (Persian)

 

Image result for publication icon

H. Rajabi, N. Ghoroubi, A. Darvizeh, J-H. Dirks, E. Appel, S. N. Gorb,

“A comparative study of the effects of vein-joints on the mechanical behaviour of insect wings: I. Single joints”,

Bioinspiration & Biomimetics, 2015, 10(5), 056003.

 Publisher's website

 

Image result for publication icon

Sh. Eshghi, H. Rajabi, A. Darvizeh, V. Nooraeefar, A. Shafiei, T. Mirzababaie Mostofi, M. Monsef.

A Simple method for geometric modelling of biological structures using image processing technique,

Scientia Iranica, 2016, 23(5), 2194-2202.

 

Image result for publication icon

H. Rajabi, A. Shafiei, A. Darvizeh, H. Babaei,

“Experimental and numerical investigations of crack propagation in dragonfly wing veins”,

AmirKabir Journal of Science & Research (Mechanical Engineering), 2016, 48(2), 61-64.

 

Image result for publication icon

H. Rajabi, A. Darvizeh, A. Shafiei, J-H. Dirks, D. Taylor,

“Numerical investigation of insect wing fracture behaviour”,

Journal of Biomechanics, 2015, 48(1), 89-94.

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, H. Monsef, M. Zare, A. Armandei, M. Moghadami,

“Design, development and demonstration of an improved bird washing machine”,

Ecotoxicology, 2014, 23(5), 960-965. (Distinguished by European Commission)

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh, A. Shafiei, Sh. Eshghi, A. Khaheshi,

“Experimental and numerical investigations of Otala lactea’s shell I. Quasi-static analysis”,

Journal of the Mechanical Behavior of Biomedical Materials, 2014, 32, 8-16.

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Investigation of the dynamic behavior of thick piezoelectric cylinders”

, Scientia Iranica, 2014, 21(3), 587-599.

 

 

Image result for publication icon

A. Darvizeh, S. Anami Rad, M. Darvizeh, R. Ansari and H. Rajabi,

“Investigation of microstructure and mechanical behavior of Woodlouse shells using experimental methods and numerical modeling”.

The Modares Journal of Mechanical Engineering, 2014, 14(7), 183-190. (Persian)

 

 

Image result for publication icon

A. Darvizeh, N. Shafiee, M. darvizeh, H. Habibollahi and H. Rajabi,

“Investigation of the effects of constructional elements on the biomechanical behavior of desert locust hind wing”.

The Modares Journal of Mechanical Engineering, 2014, 14(14), 235-244. (Persian)

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Experimental investigations of the functional morphology of dragonfly wings”,

Chinese Physics B, 2013, 22(8), 088702.

 Publisher's website

 

 

Image result for publication icon

M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh,

“Experimental analysis and numerical modeling of mollusk shells as a three dimensional integrated volume”,

Journal of the Mechanical Behavior of Biomedical Materials, 2012, 16, 38-54.

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Elasto-Plastic Analysis of Thick Cylinders Subjected to Internal Electro-magnetic Loading”,

Journal of Mechanics, 2012, 28(3), 423-430.

 Publisher's website

 

 

Image result for publication icon

A. Rezaei, A. Darvizeh, A. Basti, H. Rajabi,

“Three Dimensional Static and Dynamic Analysis of thick Functionally Graded Plates by the Meshless Local Petrov-Galerkin (MLPG) Method”

, Engineering Analysis with Boundary Elements, 2011, 35, 1168-1180. (Top Paper)

 Publisher's website

 

 

Image result for publication icon

A. Rezaei, M. Alitavoli, A. Darvizeh, H. Rajabi,

“Modeling and Simulation of Spider’s Walking”,

International Journal of Nature & Design & Ecodynamics, 2011, 6(2), 83-96.

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, M. Moghadami, A. Darvizeh,

“Investigation of Microstructure, Natural Frequencies and Vibration Modes of Dragonfly Wing”,

Journal of Bionic Engineering, 2011, 8(2), 165-173. (Top Paper)

 Publisher's website

 

 

Image result for publication icon

M. Darvizeh, A. Darvizeh, V. Arab Zadeh, H. Rajabi,

“Nonlinear analysis of multi-layered beams with piezoelectric layers considering large deformations”,

The Modares Journal of Mechanical Engineering, 2010, 10(2), 57-67. (Persian)

 

 

Image result for publication icon

M. Darvizeh, A. Darvizeh, H. Rajabi, A. Rezaei,

“Free Vibration Analysis of Dragonfly Wings using Finite Element Method”

, International Journal of Multiphysics, 2009, 3(1), 101-110.

 Publisher's website

 

Read more...

Publication

 

Publications (22)

Image result for publication icon

H. Rajabi, N. Ghoroubi, M. Malaki, A. Darvizeh, S. N. Gorb,

“Basal Complex and Basal Venation of Odonata Wings: Structural Diversity and Potential Role in the Wing Deformation”,

PLoS ONE, 2016, 11(8), e0160610.

 Publisher's website

Image result for publication icon

H. Rajabi, N. Ghoroubi, A. Darvizeh, E. Appel, S. N. Gorb,

“Effects of multiple vein microjoints on the mechanical behaviour of dragonfly wings: numerical modelling”,

Royal Society Open Science, 2016, 3, 150610.

 Publisher's website

 

Image result for publication icon

H. Rajabi, A. Shafiei, A. Darvizeh, J-H. Dirks, E. Appel, S. N. Gorb,

“Effect of microstructure on the mechanical and damping behaviour of dragonfly wing veins”,

Royal Society Open Science, 2016, 3, 160006.

 Publisher's website

 

Image result for publication icon

H. Rajabi, M. Rezasefat, A. Darvizeh, J-H. Dirks, Sh. Eshghi, A. Shafiei, T. Mirzababaie Mostofi, S. N. Gorb,

“A comparative study of the effects of constructional elements on the mechanical behaviour of dragonfly wings”,

Applied Physics A, 2016, 122(1), 1-13.

 Publisher's website

 

Image result for publication icon

Sh. Eshghi, H. Rajabi, A. Darvizeh, V. Nooraeefar, M. Alitavoli, H. Babaei,

“Simple finite element modeling of planar composite structures using digital image processing technique in Matlab”,

Journal of Science and Technology of Composites, 2016, 3(2), 195-202. (Persian)

 

Image result for publication icon

H. Rajabi, N. Ghoroubi, A. Darvizeh, J-H. Dirks, E. Appel, S. N. Gorb,

“A comparative study of the effects of vein-joints on the mechanical behaviour of insect wings: I. Single joints”,

Bioinspiration & Biomimetics, 2015, 10(5), 056003.

 Publisher's website

 

Image result for publication icon

Sh. Eshghi, H. Rajabi, A. Darvizeh, V. Nooraeefar, A. Shafiei, T. Mirzababaie Mostofi, M. Monsef.

A Simple method for geometric modelling of biological structures using image processing technique,

Scientia Iranica, 2016, 23(5), 2194-2202.

 

Image result for publication icon

H. Rajabi, A. Shafiei, A. Darvizeh, H. Babaei,

“Experimental and numerical investigations of crack propagation in dragonfly wing veins”,

AmirKabir Journal of Science & Research (Mechanical Engineering), 2016, 48(2), 61-64.

 

Image result for publication icon

H. Rajabi, A. Darvizeh, A. Shafiei, J-H. Dirks, D. Taylor,

“Numerical investigation of insect wing fracture behaviour”,

Journal of Biomechanics, 2015, 48(1), 89-94.

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, H. Monsef, M. Zare, A. Armandei, M. Moghadami,

“Design, development and demonstration of an improved bird washing machine”,

Ecotoxicology, 2014, 23(5), 960-965. (Distinguished by European Commission)

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh, A. Shafiei, Sh. Eshghi, A. Khaheshi,

“Experimental and numerical investigations of Otala lactea’s shell I. Quasi-static analysis”,

Journal of the Mechanical Behavior of Biomedical Materials, 2014, 32, 8-16.

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Investigation of the dynamic behavior of thick piezoelectric cylinders”

, Scientia Iranica, 2014, 21(3), 587-599.

 

 

Image result for publication icon

A. Darvizeh, S. Anami Rad, M. Darvizeh, R. Ansari and H. Rajabi,

“Investigation of microstructure and mechanical behavior of Woodlouse shells using experimental methods and numerical modeling”.

The Modares Journal of Mechanical Engineering, 2014, 14(7), 183-190. (Persian)

 

 

Image result for publication icon

A. Darvizeh, N. Shafiee, M. darvizeh, H. Habibollahi and H. Rajabi,

“Investigation of the effects of constructional elements on the biomechanical behavior of desert locust hind wing”.

The Modares Journal of Mechanical Engineering, 2014, 14(14), 235-244. (Persian)

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Experimental investigations of the functional morphology of dragonfly wings”,

Chinese Physics B, 2013, 22(8), 088702.

 Publisher's website

 

 

Image result for publication icon

M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh,

“Experimental analysis and numerical modeling of mollusk shells as a three dimensional integrated volume”,

Journal of the Mechanical Behavior of Biomedical Materials, 2012, 16, 38-54.

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Elasto-Plastic Analysis of Thick Cylinders Subjected to Internal Electro-magnetic Loading”,

Journal of Mechanics, 2012, 28(3), 423-430.

 Publisher's website

 

 

Image result for publication icon

A. Rezaei, A. Darvizeh, A. Basti, H. Rajabi,

“Three Dimensional Static and Dynamic Analysis of thick Functionally Graded Plates by the Meshless Local Petrov-Galerkin (MLPG) Method”

, Engineering Analysis with Boundary Elements, 2011, 35, 1168-1180. (Top Paper)

 Publisher's website

 

 

Image result for publication icon

A. Rezaei, M. Alitavoli, A. Darvizeh, H. Rajabi,

“Modeling and Simulation of Spider’s Walking”,

International Journal of Nature & Design & Ecodynamics, 2011, 6(2), 83-96.

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, M. Moghadami, A. Darvizeh,

“Investigation of Microstructure, Natural Frequencies and Vibration Modes of Dragonfly Wing”,

Journal of Bionic Engineering, 2011, 8(2), 165-173. (Top Paper)

 Publisher's website

 

 

Image result for publication icon

M. Darvizeh, A. Darvizeh, V. Arab Zadeh, H. Rajabi,

“Nonlinear analysis of multi-layered beams with piezoelectric layers considering large deformations”,

The Modares Journal of Mechanical Engineering, 2010, 10(2), 57-67. (Persian)

 

 

Image result for publication icon

M. Darvizeh, A. Darvizeh, H. Rajabi, A. Rezaei,

“Free Vibration Analysis of Dragonfly Wings using Finite Element Method”

, International Journal of Multiphysics, 2009, 3(1), 101-110.

 Publisher's website

 


CONFERENCE PAPERS (26)


Image result for conference paper icon

H. Rajabi, P. Bazargan, A. Pourbabaei, A. Darvizeh, A. Shafiei, Sh. Eshghi,

“Simulation of fatigue crack propagation in insect cuticle”,

The 4rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran-Iran, 16-17 December 2014.

 

Image result for conference paper icon

H. Rajabi, M. Monsef, A. Darvizeh, A. Shafiei,

“Numerical investigation of fracture behavior of beetle elytra”,

The 4rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran-Iran, 16-17 December 2014.

 

Image result for conference paper icon

A. Darvizeh, R. Ansari, A. Momen, H. Rajabi,

“Experimental and numerical studies of the mechanical behavior of mollusk shells”,

The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech-2014), Tehran-Iran, 18-19 February 2014.

 

Image result for conference paper icon

Sh. Eshghi, H. Rajabi, V. Nooraeifar, K. Rashvand, A. Darvizeh,

“Two and three dimensional FE modeling of dragonfly wings using image processing technique”,

8th Students Conference on Mechanical Engineering, Rasht-Iran, 8-10 October 2014. (Persian)

 

Image result for conference paper icon

M. Jafarpoor, A. Asgharnia, Sh. Eshghi, H. Rajabi, V. Nooraeifar, A. Darvizeh,

“Mathematical modeling of claw-shaped structures using image processing technique”,

8th Students Conference on Mechanical Engineering, Rasht-Iran, 8-10 October 2014. (Persian)

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, S. Fatahtooei Nejad, A. Khaheshi, P. Haghdoust,

“Biomechanical Properties of Hen’s Eggshell: Experimental Study and Numerical Modeling”,

International Conference on Mechanical, Industrial, and Manufacturing Engineering (ICMIME 2013), Copenhagen-Denmark, 13-14 June 2013.

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh, N. Rezaei, F. Sharifi, A. Shahnazari,

“Experimental and numerical studies on composite microstructure of Otala lactea’s shell”,

The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran-Iran, 18-19 December 2012.

 

Image result for conference paper icon

S. Daryadel, H. Rajabi, A. Darvizeh,

“Experimental and numerical investigations on quail eggshells composite structure”,

The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran-Iran, 18-19 December 2012

.

Image result for conference paper icon

M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh,

“Microstructural investigation and three dimensional modeling Of snail shells”,

The 20th. Annual (International) Conference on Mechanical Engineering-ISME, Shiraz-Iran, 15-17 May 2012. (Persian)

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi,

“Numerical analysis of thick circular cylinders subjected to explosive loading”,

Engineering Mechanics Institute Conference 2011, Boston, MA USA, 2-4 June 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Rezaei, A. Tajallipour,

“Mathematical prediction of dynamic behavior of double shell systems”,

The 16th Asian Technology Conference in Mathematics, Bolu-Turkey, 19-23 September 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Khaheshi,

“Biomechanical aspects of dragonfly wing composite structure”,

Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Khaheshi, J. Etedadi, M. K. Sobhani,

“Morphological and numerical investigations of butterfly wing composite structure”,

Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Khaheshi, M. K. Sobhani, J. Etedadi,

“Investigation of bee wing composite structure: A scanning electron microscopy study and numerical analysis”,

Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

 

Image result for conference paper icon

A. Darvizeh, M. Faghih-Shojaei, V. Mohammadi, H. Rajabi,

“3D finite element simulation of seashells”,

Internal Congress of The University of Guilan, Rasht-Iran, 9-11 May 2011. (Persian)

 

Image result for conference paper icon

M. Tofighi, S. Chehresa, H. Rajabi, A. Darvizeh,

“Investigation of Biomechanical aspects of Butterfly Wing microstructure”,

The first Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh, A. Khaheshi, A. Naser-Eslami, S. Ghadimi,

“Numerical Investigation of Aerodynamic Characteristics of Dragonfly Wing”,

The first Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

 

Image result for conference paper icon

M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh,

“Numerical Simulation of Conch Shells as a Three Dimensional Integrated Valume”,

The first Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh,

“Free vibration analysis of non-circular cylindrical shells coated with piezoelectric layers”,

The 15th Asian Technology Conference in Mathematics, Kuala Lumpur-Malaysia, 17-21 December 2010.

 

Image result for conference paper icon

A. Rezaei , A. Basti, H. Rajabi,

“Three Dimensional Elasto-Dynamic Analysis Of Thick Plates By The Meshless Local Petrov-galerkin Method”

 The 18th. Annual (International) Conference on Mechanical Engineering-ISME, Tehran-Iran, 11-13 May 2010.

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh,

“Theoretical investigation of the plastic deformation of circular cylindrical shells”,

International Conference on Applied Mechanics, Materials and Manufacturing, Muscat-Oman,13-15 December 2010.

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh, Kh. Fallah Nejad, A. Khaheshi,

“Dynamic response of piezoelectric circular cylinders to internal dynamic loading”,

International Conference on Applied Mechanics, Materials and Manufacturing, Muscat-Oman,13-15 December 2010.

 

Image result for conference paper icon

H. Rajabi, A. Rezaei, A. Darvizeh, M. Darvizeh, “Analytical Analysis of Thick-Walled Tubes Coated with Piezoelectric Layers under Dynamic Loading”, Asian Pacific Conference for Materials and Mechanics, Yokohama-Japan, 13-16 November 2009.

 

Image result for conference paper icon

R. Ansari, A. Rezaei, H. Rajabi, F. Sarreshtehdari,

“Two-Dimensional Deformation and Stress Analysis of Elastic Cantilever Beam Using MLPG Method”,

The 1th. National Conference of Mathematics and its Applications, Lahijan-Iran, 5 March 2008.

 

Image result for conference paper icon

A. Bagheri, S. Gh. Beygi, H. Rajabi, A. Rezaei, S. Basiri,

“Design of Robust Controller with H∞ Method for Two Legs Robot Walking on Slope Surface”,

The 16th. Annual (International) Conference on Mechanical Engineering-ISME, Kerman-Iran, 13-15 May 2007. (Persian)

 

Image result for conference paper icon

H. Torabian, H. Rajabi,

“Optimized Design of Composite Springs Using Genetic Algorithms”,

2nd Iranian Congress of Mechanical Engineering, Shahr-e-Rey-Iran, November 2007. (Persian)

 

Image result for conference paper icon

K. Deng, A. Kovalev, H. Rajabi, C. F. Schaber, Z. D. Dai and S. N. Gorb,

“Damping behaviour of primary flight feathers of wood pigeon Columba palumbus”,

109th Annual Meeting of the German Zoological Society (DZG), 14 – 17 September 2016.

 

 

 

 

Read more...

Publications

 

 Publications (22)

Image result for publication icon

H. Rajabi, N. Ghoroubi, M. Malaki, A. Darvizeh, S. N. Gorb,

“Basal Complex and Basal Venation of Odonata Wings: Structural Diversity and Potential Role in the Wing Deformation”,

PLoS ONE, 2016, 11(8), e0160610.

 Publisher's website

Image result for publication icon

H. Rajabi, N. Ghoroubi, A. Darvizeh, E. Appel, S. N. Gorb,

“Effects of multiple vein microjoints on the mechanical behaviour of dragonfly wings: numerical modelling”,

Royal Society Open Science, 2016, 3, 150610.

 Publisher's website

 

Image result for publication icon

H. Rajabi, A. Shafiei, A. Darvizeh, J-H. Dirks, E. Appel, S. N. Gorb,

“Effect of microstructure on the mechanical and damping behaviour of dragonfly wing veins”,

Royal Society Open Science, 2016, 3, 160006.

 Publisher's website

 

Image result for publication icon

H. Rajabi, M. Rezasefat, A. Darvizeh, J-H. Dirks, Sh. Eshghi, A. Shafiei, T. Mirzababaie Mostofi, S. N. Gorb,

“A comparative study of the effects of constructional elements on the mechanical behaviour of dragonfly wings”,

Applied Physics A, 2016, 122(1), 1-13.

 Publisher's website

 

Image result for publication icon

Sh. Eshghi, H. Rajabi, A. Darvizeh, V. Nooraeefar, M. Alitavoli, H. Babaei,

“Simple finite element modeling of planar composite structures using digital image processing technique in Matlab”,

Journal of Science and Technology of Composites, 2016, 3(2), 195-202. (Persian)

 

Image result for publication icon

H. Rajabi, N. Ghoroubi, A. Darvizeh, J-H. Dirks, E. Appel, S. N. Gorb,

“A comparative study of the effects of vein-joints on the mechanical behaviour of insect wings: I. Single joints”,

Bioinspiration & Biomimetics, 2015, 10(5), 056003.

 Publisher's website

 

Image result for publication icon

Sh. Eshghi, H. Rajabi, A. Darvizeh, V. Nooraeefar, A. Shafiei, T. Mirzababaie Mostofi, M. Monsef.

A Simple method for geometric modelling of biological structures using image processing technique,

Scientia Iranica, 2016, 23(5), 2194-2202.

 

Image result for publication icon

H. Rajabi, A. Shafiei, A. Darvizeh, H. Babaei,

“Experimental and numerical investigations of crack propagation in dragonfly wing veins”,

AmirKabir Journal of Science & Research (Mechanical Engineering), 2016, 48(2), 61-64.


Image result for publication icon

H. Rajabi, A. Darvizeh, A. Shafiei, J-H. Dirks, D. Taylor,

“Numerical investigation of insect wing fracture behaviour”,

Journal of Biomechanics, 2015, 48(1), 89-94.

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, H. Monsef, M. Zare, A. Armandei, M. Moghadami,

“Design, development and demonstration of an improved bird washing machine”,

Ecotoxicology, 2014, 23(5), 960-965. (Distinguished by European Commission)

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh, A. Shafiei, Sh. Eshghi, A. Khaheshi,

“Experimental and numerical investigations of Otala lactea’s shell I. Quasi-static analysis”,

Journal of the Mechanical Behavior of Biomedical Materials, 2014, 32, 8-16.

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Investigation of the dynamic behavior of thick piezoelectric cylinders”

, Scientia Iranica, 2014, 21(3), 587-599.

 

 

Image result for publication icon

A. Darvizeh, S. Anami Rad, M. Darvizeh, R. Ansari and H. Rajabi,

“Investigation of microstructure and mechanical behavior of Woodlouse shells using experimental methods and numerical modeling”.

The Modares Journal of Mechanical Engineering, 2014, 14(7), 183-190. (Persian)

 

 

Image result for publication icon

A. Darvizeh, N. Shafiee, M. darvizeh, H. Habibollahi and H. Rajabi,

“Investigation of the effects of constructional elements on the biomechanical behavior of desert locust hind wing”.

The Modares Journal of Mechanical Engineering, 2014, 14(14), 235-244. (Persian)

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Experimental investigations of the functional morphology of dragonfly wings”,

Chinese Physics B, 2013, 22(8), 088702.

 Publisher's website

 

 

Image result for publication icon

M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh,

“Experimental analysis and numerical modeling of mollusk shells as a three dimensional integrated volume”,

Journal of the Mechanical Behavior of Biomedical Materials, 2012, 16, 38-54.

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, A. Darvizeh,

“Elasto-Plastic Analysis of Thick Cylinders Subjected to Internal Electro-magnetic Loading”,

Journal of Mechanics, 2012, 28(3), 423-430.

 Publisher's website

 

 

Image result for publication icon

A. Rezaei, A. Darvizeh, A. Basti, H. Rajabi,

“Three Dimensional Static and Dynamic Analysis of thick Functionally Graded Plates by the Meshless Local Petrov-Galerkin (MLPG) Method”

, Engineering Analysis with Boundary Elements, 2011, 35, 1168-1180. (Top Paper)

 Publisher's website

 

 

Image result for publication icon

A. Rezaei, M. Alitavoli, A. Darvizeh, H. Rajabi,

“Modeling and Simulation of Spider’s Walking”,

International Journal of Nature & Design & Ecodynamics, 2011, 6(2), 83-96.

 Publisher's website

 

 

Image result for publication icon

H. Rajabi, M. Moghadami, A. Darvizeh,

“Investigation of Microstructure, Natural Frequencies and Vibration Modes of Dragonfly Wing”,

Journal of Bionic Engineering, 2011, 8(2), 165-173. (Top Paper)

 Publisher's website

 

 

Image result for publication icon

M. Darvizeh, A. Darvizeh, V. Arab Zadeh, H. Rajabi,

“Nonlinear analysis of multi-layered beams with piezoelectric layers considering large deformations”,

The Modares Journal of Mechanical Engineering, 2010, 10(2), 57-67. (Persian)

 

 

Image result for publication icon

M. Darvizeh, A. Darvizeh, H. Rajabi, A. Rezaei,

“Free Vibration Analysis of Dragonfly Wings using Finite Element Method”

, International Journal of Multiphysics, 2009, 3(1), 101-110.

 Publisher's website

 


CONFERENCE PAPERS (26)


Image result for conference paper icon

H. Rajabi, P. Bazargan, A. Pourbabaei, A. Darvizeh, A. Shafiei, Sh. Eshghi,

“Simulation of fatigue crack propagation in insect cuticle”,

The 4rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran-Iran, 16-17 December 2014.

 

Image result for conference paper icon

H. Rajabi, M. Monsef, A. Darvizeh, A. Shafiei,

“Numerical investigation of fracture behavior of beetle elytra”,

The 4rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran-Iran, 16-17 December 2014.

 

Image result for conference paper icon

A. Darvizeh, R. Ansari, A. Momen, H. Rajabi,

“Experimental and numerical studies of the mechanical behavior of mollusk shells”,

The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech-2014), Tehran-Iran, 18-19 February 2014.

 

Image result for conference paper icon

Sh. Eshghi, H. Rajabi, V. Nooraeifar, K. Rashvand, A. Darvizeh,

“Two and three dimensional FE modeling of dragonfly wings using image processing technique”,

8th Students Conference on Mechanical Engineering, Rasht-Iran, 8-10 October 2014. (Persian)

 

Image result for conference paper icon

M. Jafarpoor, A. Asgharnia, Sh. Eshghi, H. Rajabi, V. Nooraeifar, A. Darvizeh,

“Mathematical modeling of claw-shaped structures using image processing technique”,

8th Students Conference on Mechanical Engineering, Rasht-Iran, 8-10 October 2014. (Persian)

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, S. Fatahtooei Nejad, A. Khaheshi, P. Haghdoust,

“Biomechanical Properties of Hen’s Eggshell: Experimental Study and Numerical Modeling”,

International Conference on Mechanical, Industrial, and Manufacturing Engineering (ICMIME 2013), Copenhagen-Denmark, 13-14 June 2013.

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh, N. Rezaei, F. Sharifi, A. Shahnazari,

“Experimental and numerical studies on composite microstructure of Otala lactea’s shell”,

The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran-Iran, 18-19 December 2012.

 

Image result for conference paper icon

S. Daryadel, H. Rajabi, A. Darvizeh,

“Experimental and numerical investigations on quail eggshells composite structure”,

The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran-Iran, 18-19 December 2012

.

Image result for conference paper icon

M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh,

“Microstructural investigation and three dimensional modeling Of snail shells”,

The 20th. Annual (International) Conference on Mechanical Engineering-ISME, Shiraz-Iran, 15-17 May 2012. (Persian)

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi,

“Numerical analysis of thick circular cylinders subjected to explosive loading”,

Engineering Mechanics Institute Conference 2011, Boston, MA USA, 2-4 June 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Rezaei, A. Tajallipour,

“Mathematical prediction of dynamic behavior of double shell systems”,

The 16th Asian Technology Conference in Mathematics, Bolu-Turkey, 19-23 September 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Khaheshi,

“Biomechanical aspects of dragonfly wing composite structure”,

Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Khaheshi, J. Etedadi, M. K. Sobhani,

“Morphological and numerical investigations of butterfly wing composite structure”,

Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

 

Image result for conference paper icon

A. Darvizeh, H. Rajabi, A. Khaheshi, M. K. Sobhani, J. Etedadi,

“Investigation of bee wing composite structure: A scanning electron microscopy study and numerical analysis”,

Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

 

Image result for conference paper icon

A. Darvizeh, M. Faghih-Shojaei, V. Mohammadi, H. Rajabi,

“3D finite element simulation of seashells”,

Internal Congress of The University of Guilan, Rasht-Iran, 9-11 May 2011. (Persian)

 

Image result for conference paper icon

M. Tofighi, S. Chehresa, H. Rajabi, A. Darvizeh,

“Investigation of Biomechanical aspects of Butterfly Wing microstructure”,

The first Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh, A. Khaheshi, A. Naser-Eslami, S. Ghadimi,

“Numerical Investigation of Aerodynamic Characteristics of Dragonfly Wing”,

The first Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

 

Image result for conference paper icon

M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh,

“Numerical Simulation of Conch Shells as a Three Dimensional Integrated Valume”,

The first Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh,

“Free vibration analysis of non-circular cylindrical shells coated with piezoelectric layers”,

The 15th Asian Technology Conference in Mathematics, Kuala Lumpur-Malaysia, 17-21 December 2010.

 

Image result for conference paper icon

A. Rezaei , A. Basti, H. Rajabi,

“Three Dimensional Elasto-Dynamic Analysis Of Thick Plates By The Meshless Local Petrov-galerkin Method”

 The 18th. Annual (International) Conference on Mechanical Engineering-ISME, Tehran-Iran, 11-13 May 2010.

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh,

“Theoretical investigation of the plastic deformation of circular cylindrical shells”,

International Conference on Applied Mechanics, Materials and Manufacturing, Muscat-Oman,13-15 December 2010.

 

Image result for conference paper icon

H. Rajabi, A. Darvizeh, Kh. Fallah Nejad, A. Khaheshi,

“Dynamic response of piezoelectric circular cylinders to internal dynamic loading”,

International Conference on Applied Mechanics, Materials and Manufacturing, Muscat-Oman,13-15 December 2010.

 

Image result for conference paper icon

H. Rajabi, A. Rezaei, A. Darvizeh, M. Darvizeh, “Analytical Analysis of Thick-Walled Tubes Coated with Piezoelectric Layers under Dynamic Loading”, Asian Pacific Conference for Materials and Mechanics, Yokohama-Japan, 13-16 November 2009.

 

Image result for conference paper icon

R. Ansari, A. Rezaei, H. Rajabi, F. Sarreshtehdari,

“Two-Dimensional Deformation and Stress Analysis of Elastic Cantilever Beam Using MLPG Method”,

The 1th. National Conference of Mathematics and its Applications, Lahijan-Iran, 5 March 2008.

 

Image result for conference paper icon

A. Bagheri, S. Gh. Beygi, H. Rajabi, A. Rezaei, S. Basiri,

“Design of Robust Controller with H∞ Method for Two Legs Robot Walking on Slope Surface”,

The 16th. Annual (International) Conference on Mechanical Engineering-ISME, Kerman-Iran, 13-15 May 2007. (Persian)

 

Image result for conference paper icon

H. Torabian, H. Rajabi,

“Optimized Design of Composite Springs Using Genetic Algorithms”,

2nd Iranian Congress of Mechanical Engineering, Shahr-e-Rey-Iran, November 2007. (Persian)

 

Image result for conference paper icon

K. Deng, A. Kovalev, H. Rajabi, C. F. Schaber, Z. D. Dai and S. N. Gorb,

“Damping behaviour of primary flight feathers of wood pigeon Columba palumbus”,

109th Annual Meeting of the German Zoological Society (DZG), 14 – 17 September 2016.

 

 

 

 

Read more...
Subscribe to this RSS feed