Conferences

33.  K. Stamm, H. Rajabi, E. Appel, S.N. Gorb, “The structure and function of nodus in Libellulid wings”, The Society for Experimental Biology (SEB) Annual Meeting, Florence-Italy, 3-6 July 2018.

34.  L-Y. Wang, H. Rajabi, W-S. Huang, H-C. Tang, L-C. Huang, S. N. Gorb, C-P. Lin, “To hard to swallow: the secondary defence strategies of an aposematic insect and its underlying mechanisms”, The Society for Experimental Biology (SEB) Annual Meeting, Florence-Italy, 3-6 July 2018.

35.  T. H. Büscher, M. Schmitt, H. Rajabi, S. N. Gorb, “Buckling prevention strategies in the hindleg tibia of the stick insect Carausius Morosus (Sinety, 1901) during the postembryonic development”, The Society for Experimental Biology (SEB) Annual Meeting, Florence-Italy, 3-6 July 2018.

36.  A. Sander, K. Stamm, H. Rajabi, J-H. Dirks, S.N. Gorb, D. Matz, A. Baars, “A novel, highly automated method for high resolution modelling of complex insect wings”, The Society for Experimental Biology (SEB) Annual Meeting, Florence-Italy, 3-6 July 2018.

37.  E. Appel, L. Heepe, H. Rajabi, S.N. Gorb, “Resilin-A rubber-like protein in insect flight system”, 4th International Congress on Invertebrate Morphology (ICIM4), Moscow-Russia, 18-23 August 2017.

38.  E. Appel, H. Rajabi, S.N. Gorb, “Structure and properties of dragonfly wings: composite structure of fibrous material supplemented by resilin”, The International Congress of Odonatology 2017 (ICO2017), Cambridge-UK, 15-20 July 2017.

39.  C. Lietz, S.N. Gorb, H. Rajabi, “Comparative study of the damping properties of dragonfly and damselfly wings”, 36th Meeting of German-Speaking Odonatologists (GdO), Berlin-Germany, 17-19 March 2017.

40.  K. Stamm, H. Rajabi, E. Appel, S.N. Gorb, “Morphological comparison of the forewing nodus of four different species of Libellulidae”, 36th Meeting of German-Speaking Odonatologists (GdO), Berlin-Germany, 17-19 March 2017.

41.  K. Deng, A. Kovalev, H. Rajabi, C. F. Schaber, Z. D. Dai, S. N. Gorb, “Damping behaviour of primary flight feathers of wood pigeon Columba palumbus”, 109th Annual Meeting of the German Zoological Society (DZG), Kiel-Germany, 14–17 September 2016.

42.  H. Rajabi, N. Ghoroubi, E. Appel, A. Khaheshi, S. N. Gorb, “How do vein-joints influence the deformation of dragonfly wings?” The 5th International Conference of Bionic Engineering, Ningbo-China, 21-24 June 2016.

43.  H. Rajabi, P. Bazargan, A. Pourbabaei, A. Darvizeh, A. Shafiei, S. Eshghi, “Simulation of fatigue crack propagation in insect cuticle”, The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran-Iran, 16-17 December 2014.

44.  H. Rajabi, M. Monsef, A. Darvizeh, A. Shafiei, “Numerical investigation of fracture behavior of beetle elytra”, The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran-Iran, 16-17 December 2014.

45.  A. Darvizeh, R. Ansari, A. Momen, H. Rajabi, “Experimental and numerical studies of the mechanical behavior of mollusk shells”, The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech-2014), Tehran-Iran, 18-19 February 2014.

46.  Sh. Eshghi, H. Rajabi, V. Nooraeifar, K. Rashvand, A. Darvizeh, “Two and three dimensional FE modeling of dragonfly wings using image processing technique”, 8th Students Conference on Mechanical Engineering, Rasht-Iran, 8-10 October 2014. (Persian)

47.  M. Jafarpoor, A. Asgharnia, Sh. Eshghi, H. Rajabi, V. Nooraeifar, A. Darvizeh, “Mathematical modeling of claw-shaped structures using image processing technique”, 8th Students Conference on Mechanical Engineering, Rasht-Iran, 8-10 October 2014. (Persian)

48.  A. Darvizeh, H. Rajabi, S. Fatahtooei Nejad, A. Khaheshi, P. Haghdoust, “Biomechanical Properties of Hen’s Eggshell: Experimental Study and Numerical Modeling”, International Conference on Mechanical, Industrial, and Manufacturing Engineering (ICMIME 2013), Copenhagen-Denmark, 13-14 June 2013.

49.   H. Rajabi, A. Darvizeh, N. Rezaei, F. Sharifi, A. Shahnazari, “Experimental and numerical studies on composite microstructure of Otala lactea’s shell”, The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran-Iran, 18-19 December 2012.

50.   S. Daryadel, H. Rajabi, A. Darvizeh, “Experimental and numerical investigations on quail eggshells composite structure”, The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran-Iran, 18-19 December 2012.

51.  M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh, “Microstructural investigation and three dimensional modeling Of snail shells”, The 20th Annual (International) Conference on Mechanical Engineering-ISME, Shiraz-Iran, 15-17 May 2012. (Persian)

52.  A. Darvizeh, H. Rajabi, “Numerical analysis of thick circular cylinders subjected to explosive loading”, Engineering Mechanics Institute Conference 2011, Boston, MA USA, 2-4 June 2011.

53.   A. Darvizeh, H. Rajabi, A. Rezaei, A. Tajallipour, “Mathematical prediction of dynamic behavior of double shell systems”, The 16th Asian Technology Conference in Mathematics, Bolu-Turkey, 19-23 September 2011.

54.  A. Darvizeh, H. Rajabi, A. Khaheshi, “Biomechanical aspects of dragonfly wing composite structure”, Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

55.   A. Darvizeh, H. Rajabi, A. Khaheshi, J. Etedadi, M. K. Sobhani, “Morphological and numerical investigations of butterfly wing composite structure”, Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

56.   A. Darvizeh, H. Rajabi, A. Khaheshi, M. K. Sobhani, J. Etedadi, “Investigation of bee wing composite structure: A scanning electron microscopy study and numerical analysis”, Book of Abstracts, International Bionic Engineering Conference, Boston-USA, 18-20 September 2011.

57.  A. Darvizeh, M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, “3D finite element simulation of seashells”, Internal Congress of The University of Guilan, Rasht-Iran, 9-11 May 2011. (Persian)

58.   M. Tofighi, S. Chehresa, H. Rajabi, A. Darvizeh, “Investigation of Biomechanical aspects of Butterfly Wing microstructure”, The first Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

59.   H. Rajabi, A. Darvizeh, A. Khaheshi, A. Naser-Eslami, S. Ghadimi, “Numerical Investigation of Aerodynamic Characteristics of Dragonfly Wing”, The 1st Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

60.   M. Faghih-Shojaei, V. Mohammadi, H. Rajabi, A. Darvizeh, “Numerical Simulation of Conch Shells as a Three Dimensional Integrated Valume”, The 1st Regional Conference on Mechanical Engineering, Lahijan-Iran, 10 December 2011. (Persian)

61.   H. Rajabi, A. Darvizeh, “Free vibration analysis of non-circular cylindrical shells coated with piezoelectric layers”, The 15th Asian Technology Conference in Mathematics, Kuala Lumpur-Malaysia, 17-21 December 2010.

62.  A. Rezaei , A. Basti, H. Rajabi,  “Three Dimensional Elasto-Dynamic Analysis Of Thick Plates By The Meshless Local Petrov-galerkin Method”, The 18th Annual (International) Conference on Mechanical Engineering-ISME, Tehran-Iran, 11-13 May 2010.

63.   H. Rajabi, A. Darvizeh, “Theoretical investigation of the plastic deformation of circular cylindrical shells”, International Conference on Applied Mechanics, Materials and Manufacturing, Muscat-Oman,13-15 December 2010.

64.   H. Rajabi, A. Darvizeh, Kh. Fallah Nejad, A. Khaheshi, “Dynamic response of piezoelectric circular cylinders to internal dynamic loading”, International Conference on Applied Mechanics, Materials and Manufacturing, Muscat-Oman,13-15 December 2010.

65.   H. Rajabi, A. Rezaei, A. Darvizeh, M. Darvizeh, “Analytical Analysis of Thick-Walled Tubes Coated with Piezoelectric Layers under Dynamic Loading”, Asian Pacific Conference for Materials and Mechanics, Yokohama-Japan, 13-16

November 2009.